Plate according to the material classification can be divided into two categories: solid wood board, artificial board, according to the classification can be divided into solid plate, plywood, fiber board, decorative panels, fire board, particle board and so on.

Solid Wood

As the name suggests, the solid wood board is the use of complete wood made of wood. The plank is firm and durable, the line is natural, it is the choice of the actor in decorating. But because of such a high cost, and the construction process is high, the use of the decoration is not much. Solid wood panels are generally in accordance with the name of the material classification, there is no uniform standard specifications. In addition to the floor and the door will use solid wood panels, generally we use the sheet are processed out of artificial wood-based panel.

Splint

Plywood, also known as plywood, line commonly known as fine core board. Made from three or more layers of one millimeter thick veneer or sheet. Is currently the most commonly used hand made furniture materials. Plywood is generally divided into 3 plates, 5 plates, 9 plates, 12 plates, 15 plates and 18 plates of six specifications (1 1mm is).

Decorative panel

Decorative panels, commonly known as the panel, the solid wood board precision slicing into the thickness of 0.2mm thin veneer, plywood as base material to and after adhesive manufacturing process with the single decoration decorative sheet. It is a special way of plywood, with a thickness of 3 cm.

Joinery board

Thin wood board, commonly known as big core board. The big core board is made up of two pieces of single board in the middle of the bonding and pressing splicing board. The price of large core board is cheaper than that of fine core board, and its vertical direction (to the core material to distinguish), the bending strength is poor, but the lateral bending and compression strength is higher.

Particle board

Particleboard is made of wood chips as the main raw material, re infiltration and glue, thin plate pressed by additives. According to the pressing method can be divided into two categories of extruded particle board, flat pressed shaving board. The main advantage of this kind of plate is that the price is very cheap. The disadvantages are obvious: the intensity is very poor. Generally not suitable for making the larger or the mechanical requirements of the furniture.

Density plate

Density board, also known as fiber board. Is the use of wood fiber or other plant fiber as raw material, the application of urea formaldehyde resin or other adhesive made of artificial board, according to the density of different, divided into high density board, medium density board, low density board. Density board due to the impact of soft and soft, it is easy to re processing. In foreign countries, density board is the production of furniture of a good material, but due to the national standards on the high board than the international standard several times lower, so density board in our use of quality still needs to be improved.

Fireproof board

Fire prevention board is to use siliceous material or calcareous material as the main raw material, and a certain proportion of fiber material, lightweight aggregate, binder, and chemical additives mixed and autoclaved technology made by the decorative sheet. Is more and more use of a new type of material, its use is not only because of the fire. The construction of fire protection board for the requirements of the glue is relatively high, better quality of the fire board price than decorative panels are also expensive. The thickness of fire board is generally 8mm, 10mm and 12mm.

melamine board

Melamine board, the full name is the melamine impregnated paper veneer artificial board, is a kind of wall decoration materials. The manufacturing process is with a different color or texture of paper into the melamine resin adhesive soaked, then drying to a certain degree of curing, the pavement in particleboard, medium density fiberboard or hardboard surfaces, and are formed by the hot pressing of the decorative board.

Broken wood

Is a wood processing of the edge of the remaining material, after cutting, drying, hanging plastic, hot and hot.

Woodwool

Also known as Wanli plate, is the use of wood waste, pressurized by the machine planing Yang wood, after chemical solution soaking and blending cement into the mould molding, solidification, drying and.

Plywood

Plywood is composed of more than three layers of veneer glued consists of hardwood and softwood plywood glue plywood two.

The wood plastic wood board is to adopt hot melting plastics, including polyethylene, polypropylene, polyvinyl chloride used as adhesives for wood powder material such as wood, agricultural plant straw, farmers plant the shell powder as filling material, through advanced technology, equipment and production of high-tech products. The tensile strength, flexural strength, flexural modulus, impact strength and softening temperature of VEKA are all reached or superior to the international advanced standard.

Wood products with non-toxic, corrosion proof, insulation, weather resistance, aging resistance and other advantages, like wood, sawing, planing, nail, drill, riveting, instead of gas pollution decoration, decoration materials on the market now.


版权所有 粤ICP备16081573号 技术支持:网盛科技